RFC 1565 (rfc1565) - Page 2 of 17


Network Services Monitoring MIB



Alternative Format: Original Text Document



RFC 1565            Network Services Monitoring MIB         January 1994


1.  Introduction

   There are a wide range of networked applications for which it is
   appropriate to provide SNMP Monitoring.  This includes both TCP/IP
   and OSI applications.  This document defines a MIB which contains the
   elements common to the monitoring of any network service application.
   This information includes a table of all monitorable network service
   applications, a count of the associations (connections) to each
   application, and basic information about the parameters and status of
   each application-related association.

   This MIB may be used on its own for any application, and for most
   simple applications this will suffice.  This MIB is also designed to
   serve as a building block which can be used in conjunction with
   application-specific monitoring and management.  Two examples of this
   are MIBs defining additional variables for monitoring a Message
   Transfer Agent (MTA) service or a Directory Service Agent (DSA)
   service. It is expected that further MIBs of this nature will be
   specified.

   This MIB does not attempt to provide facilities for management of the
   host or hosts the network service application runs on, nor does it
   provide facilities for monitoring applications that provide something
   other than a network service.  Host resource and general application
   monitoring is handled by the Host Resources MIB.

2.  The SNMPv2 Network Management Framework

   The SNMPv2 Network Management Framework consists of four major
   components.  They are:

      o  RFC 1442 [1] which defines the SMI, the mechanisms used for
         describing and naming objects for the purpose of management.

      o  STD 17, RFC 1213 [2] defines MIB-II, the core set of managed
         objects for the Internet suite of protocols.

      o  RFC 1445 [3] which defines the administrative and other
         architectural aspects of the framework.

      o  RFC 1448 [4] which defines the protocol used for network
         access to managed objects.

   The Framework permits new objects to be defined for the purpose of
   experimentation and evaluation.






Kille & Freed