RFC 3813 (rfc3813) - Page 2 of 60


Multiprotocol Label Switching (MPLS) Label Switching Router (LSR) Management Information Base (MIB)



Alternative Format: Original Text Document



RFC 3813                      MPLS LSR MIB                     June 2004


Table of Contents

   1.  Introduction . . . . . . . . . . . . . . . . . . . . . . . . .  2
   2.  Terminology. . . . . . . . . . . . . . . . . . . . . . . . . .  3
   3.  The SNMP Management Framework. . . . . . . . . . . . . . . . .  3
   4.  Outline. . . . . . . . . . . . . . . . . . . . . . . . . . . .  3
       4.1.  Summary of LSR MIB Module. . . . . . . . . . . . . . . .  4
   5.  Brief Description of MIB Module Objects. . . . . . . . . . . .  4
       5.1.  mplsInterfaceTable . . . . . . . . . . . . . . . . . . .  4
       5.2.  mplsInterfacePerfTable . . . . . . . . . . . . . . . . .  4
       5.3.  mplsInSegmentTable . . . . . . . . . . . . . . . . . . .  5
       5.4.  mplsInSegmentPerfTable . . . . . . . . . . . . . . . . .  5
       5.5.  mplsOutSegmentTable. . . . . . . . . . . . . . . . . . .  5
       5.6.  mplsOutSegmentPerfTable. . . . . . . . . . . . . . . . .  5
       5.7.  mplsXCTable. . . . . . . . . . . . . . . . . . . . . . .  5
       5.8.  mplsLabelStackTable. . . . . . . . . . . . . . . . . . .  6
       5.9.  mplsInSegmentMapTable. . . . . . . . . . . . . . . . . .  6
   6.  Use of 32-bit and 64-bit Counters. . . . . . . . . . . . . . .  6
   7.  Example of LSP Setup . . . . . . . . . . . . . . . . . . . . .  6
   8.  Application of the Interface Group to MPLS . . . . . . . . . .  8
       8.1.  Support of the MPLS Layer by ifTable . . . . . . . . . .  9
   9.  The Use of RowPointer. . . . . . . . . . . . . . . . . . . . . 10
   10. MPLS Label Switching Router MIB Module Definitions . . . . . . 11
   11. Security Considerations. . . . . . . . . . . . . . . . . . . . 55
   12. Acknowledgments. . . . . . . . . . . . . . . . . . . . . . . . 56
   13. IANA Considerations. . . . . . . . . . . . . . . . . . . . . . 56
       13.1. IANA Considerations for MPLS-LSR-STD-MIB . . . . . . . . 56
   14. References . . . . . . . . . . . . . . . . . . . . . . . . . . 57
       14.1. Normative References . . . . . . . . . . . . . . . . . . 57
       14.2. Informative References . . . . . . . . . . . . . . . . . 58
   15. Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . 59
   16. Full Copyright Statement . . . . . . . . . . . . . . . . . . . 60

1.  Introduction

   This memo defines an portion of the Management Information Base (MIB)
   for use with network management protocols in the Internet community.
   In particular, it describes managed objects for modeling a
   Multiprotocol Label Switching (MPLS) [RFC 3031] Label Switching Router
   (LSR).

   Comments should be made directly to the MPLS mailing list at
   .

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED",  "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in BCP 14, RFC 2119,
   reference [RFC 2119].



Srinivasan, et al.          Standards Track