RFC 2264 (rfc2264) - Page 1 of 76
User-based Security Model (USM) for version 3 of the Simple Network Management Protocol (SNMPv3)
Alternative Format: Original Text Document
Network Working Group U. Blumenthal
Request for Comments: 2264 IBM T. J. Watson Research
Category: Standards Track B. Wijnen
IBM T. J. Watson Research
January 1998
User-based Security Model (USM) for version 3 of the
Simple Network Management Protocol (SNMPv3)
Status of this Memo
This document specifies an Internet standards track protocol for the
Internet community, and requests discussion and suggestions for
improvements. Please refer to the current edition of the "Internet
Official Protocol Standards" (STD 1) for the standardization state
and status of this protocol. Distribution of this memo is unlimited.
Copyright Notice
Copyright (C) The Internet Society (1997). All Rights Reserved.
Abstract
This document describes the User-based Security Model (USM) for SNMP
version 3 for use in the SNMP architecture [RFC 2261]. It defines the
Elements of Procedure for providing SNMP message level security.
This document also includes a MIB for remotely monitoring/managing
the configuration parameters for this Security Model.
Table of Contents
1. Introduction 3
1.1. Threats 4
1.2. Goals and Constraints 5
1.3. Security Services 6
1.4. Module Organization 7
1.4.1. Timeliness Module 7
1.4.2. Authentication Protocol 8
1.4.3. Privacy Protocol 8
1.5. Protection against Message Replay, Delay and Redirection 8
1.5.1. Authoritative SNMP engine 8
1.5.2. Mechanisms 8
1.6. Abstract Service Interfaces. 10
1.6.1. User-based Security Model Primitives for Authentication 11
1.6.2. User-based Security Model Primitives for Privacy 11
2. Elements of the Model 12
2.1. User-based Security Model Users 12
Blumenthal & Wijnen Standards Track