RFC 2383 (rfc2383) - Page 1 of 50
ST2+ over ATM Protocol Specification - UNI 3
Alternative Format: Original Text Document
Network Working Group M. Suzuki
Request for Comments: 2383 NTT
Category: Informational August 1998
ST2+ over ATM
Protocol Specification - UNI 3.1 Version
Status of this Memo
This memo provides information for the Internet community. It does
not specify an Internet standard of any kind. Distribution of this
memo is unlimited.
Copyright Notice
Copyright (C) The Internet Society (1998). All Rights Reserved.
Abstract
This document specifies an ATM-based protocol for communication
between ST2+ agents. The ST2+ over ATM protocol supports the matching
of one hop in an ST2+ tree-structure stream with one ATM connection.
In this document, ATM is a subnet technology for the ST2+ stream.
The ST2+ over ATM protocol is designed to achieve resource-
reservation communications across ATM and non-ATM networks, to extend
the UNI 3.1/4.0 signaling functions, and to reduce the UNI 4.0 LIJ
signaling limitations.
The specifications of the ST2+ over ATM protocol consist of a
revision of RFC 1819 ST2+ and specifications of protocol interaction
between ST2+ and ATM on the user plane, management plane, and control
plane which correspond to the three planes of the B-ISDN protocol
reference model.
1. Introduction
1.1 Purpose of Document
The purpose of this document is to specify an ATM-based protocol for
communication between ST2+ agents.
The ST2+ over ATM protocol is designed to support the matching of one
hop in an ST2+ tree-structure stream with one ATM connection; it is
not designed to support an entire ST2+ tree-structure stream with a
point-to-multipoint ATM connection only.
Suzuki Informational