RFC 3064 (rfc3064) - Page 1 of 56
MGCP CAS Packages
Alternative Format: Original Text Document
Network Working Group B. Foster
Request for Comments: 3064 Cisco Systems
Category: Informational February 2001
MGCP CAS Packages
Status of this Memo
This memo provides information for the Internet community. It does
not specify an Internet standard of any kind. Distribution of this
memo is unlimited.
Copyright Notice
Copyright (C) The Internet Society (2001). All Rights Reserved.
Abstract
This document contains a collection of media gateway Channel
Associated Signaling (CAS) packages for R1 CAS, North American CAS,
CAS PBX interconnect as well as basic FXO support. Included are six
packages. The "MS" package covers MF single stage dialing trunks.
This includes wink start and immediate start PBX DID/DOD trunks as
well as basic R1 and Feature Group D (FGD) Terminating protocol [3].
The "DT "package covers immediate start and basic DTMF and dial-pulse
trunks and the "BL" package covers the interface to a basic PBX
(digital or FXS interface). In addition to the Terminating protocol,
there are three other FGD protocols described in [3]. These include
EAIN and EANA which is covered by the enclosed "MD" package and the
Operator Service Signaling protocol which is handled by the "MO"
package. Support for basic FXO interconnect is provided by "DO"
package.
Conventions used in this document
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in RFC-2119.
IESG Note:
This document is being published for the information of the
community. It describes a protocol that is currently being deployed
in a number of products. Implementers should be aware of
developments in the IETF Megaco Working Group and ITU SG16 who are
currently working on a potential successor to this protocol.
Foster Informational