Network Working Group B. Wijnen Request for Comments: 2089 IBM Category: Informational D. Levi SNMP Research, Inc January 1997 V2ToV1 Mapping SNMPv2 onto SNMPv1 within a bi-lingual SNMP agent Status of this Memo This memo provides information for the Internet community. This memo does not specify an Internet standard of any kind. Distribution of this memo is unlimited. Abstract The goal of this memo is to document a common way of mapping an SNMPv2 response into an SNMPv1 response within a bi-lingual SNMP agent (one that supports both SNMPv1 and SNMPv2). Table of Contents 1.0 Introduction . . . . . . . . . . . . . . . . . . . . . . . 2 2.0 Mapping SNMPv2 into SNMPv1 . . . . . . . . . . . . . . . . 2 2.1 Mapping SNMPv2 error-status into SNMPv1 error-status . . . 3 2.2 Mapping SNMPv2 exceptions into SNMPv1 . . . . . . . . . . 3 2.3 Mapping noSuchObject and noSuchInstance . . . . . . . . . 4 2.4 Mapping endOfMibView . . . . . . . . . . . . . . . . . . . 5 2.5 Mapping SNMPv2 SMI into SNMPv1 . . . . . . . . . . . . . . 5 3.0 Processing SNMPv1 requests . . . . . . . . . . . . . . . . 6 3.1 Processing an SNMPv1 GET request . . . . . . . . . . . . . 6 3.2 Processing an SNMPv1 GETNEXT request . . . . . . . . . . . 7 3.3 Processing an outgoing SNMPv2 trap . . . . . . . . . . . . 8 4.0 Acknowledgements . . . . . . . . . . . . . . . . . . . . . 10 5.0 References . . . . . . . . . . . . . . . . . . . . . . . . 10 6.0 Security Considerations . . . . . . . . . . . . . . . . . 10 7.0 Authors' Addresses . . . . . . . . . . . . . . . . . . . . 11 Appendix A. Background Information . . . . . . . . . . . . . 12 A.1 Mapping of error-status Values . . . . . . . . . . . . . 12 A.2 SNMPv1 traps without Counter64 varBinds. . . . . . . . . 12 Wijnen & Levi Informational