RFC 2474 (rfc2474) - Page 2 of 20
Definition of the Differentiated Services Field (DS Field) in the IPv4 and IPv6 Headers
Alternative Format: Original Text Document
RFC 2474 Differentiated Services Field December 1998
The requirements or rules of each service must be set through
administrative policy mechanisms which are outside the scope of this
document. A differentiated services-compliant network node includes
a classifier that selects packets based on the value of the DS field,
along with buffer management and packet scheduling mechanisms capable
of delivering the specific packet forwarding treatment indicated by
the DS field value. Setting of the DS field and conditioning of the
temporal behavior of marked packets need only be performed at network
boundaries and may vary in complexity.
This document defines the IP header field, called the DS (for
differentiated services) field. In IPv4, it defines the layout of
the TOS octet; in IPv6, the Traffic Class octet. In addition, a base
set of packet forwarding treatments, or per-hop behaviors, is
defined.
For a more complete understanding of differentiated services, see
also the differentiated services architecture [ARCH].
Table of Contents
1. Introduction ................................................. 3
2. Terminology Used in This Document ............................ 5
3. Differentiated Services Field Definition ..................... 7
4. Historical Codepoint Definitions and PHB Requirements ........ 9
4.1 A Default PHB ............................................. 9
4.2 Once and Future IP Precedence Field Use ................... 10
4.2.1 IP Precedence History and Evolution in Brief .......... 10
4.2.2 Subsuming IP Precedence into Class Selector .......... 11
Codepoints
4.2.2.1 The Class Selector Codepoints ..................... 11
4.2.2.2 The Class Selector PHB Requirements ............... 11
4.2.2.3 Using the Class Selector PHB Requirements ......... 12
for IP Precedence Compatibility
4.2.2.4 Example Mechanisms for Implementing Class ......... 12
Selector Compliant PHB Groups
4.3 Summary ................................................... 13
5. Per-Hop Behavior Standardization Guidelines .................. 13
6. IANA Considerations .......................................... 14
7. Security Considerations ...................................... 15
7.1 Theft and Denial of Service ............................... 15
7.2 IPsec and Tunneling Interactions .......................... 16
8. Acknowledgments .............................................. 17
9. References ................................................... 17
Authors' Addresses ............................................... 19
Full Copyright Statement ......................................... 20
Nichols, et. al. Standards Track