RFC 2496 (rfc2496) - Page 1 of 60


Definitions of Managed Object for the DS3/E3 Interface Type



Alternative Format: Original Text Document



Network Working Group                                    D. Fowler, Editor
Request for Comments: 2496                              Newbridge Networks
Obsoletes: 1407                                               January 1999
Category: Standards Track


      Definitions of Managed Objects for the DS3/E3 Interface Type

Status of this Memo

   This document specifies an Internet standards track protocol for the
   Internet community, and requests discussion and suggestions for
   improvements.  Please refer to the current edition of the "Internet
   Official Protocol Standards" (STD 1) for the standardization state
   and status of this protocol.  Distribution of this memo is unlimited.

Copyright Notice

   Copyright (C) The Internet Society (1999).  All Rights Reserved.

Abstract

   This memo defines a portion of the Management Information Base (MIB)
   for use with network management protocols in the Internet community.
   In particular, it describes objects used for managing DS3 and E3
   interfaces.  This document is a companion document with Definitions
   of Managed Objects for the DS0 (RFC 2494 [25]), DS1/E1/DS2/E2 (RFC
   2495 [17]), and the work in progress SONET/SDH Interface Types.

   This memo specifies a MIB module in a manner that is both compliant
   to the SNMPv2 SMI, and semantically identical to the peer SNMPv1
   definitions.

Table of Contents

   1 The SNMP Management Framework ................................  2
   1.1 Changes from RFC 1407 .......................................  3
   2 Overview .....................................................  4
   2.1 Use of ifTable for DS3 Layer ...............................  5
   2.2 Usage Guidelines ...........................................  5
   2.2.1 Usage of ifStackTable ....................................  5
   2.2.2 Usage of Channelization for DS3, DS1, DS0 ................  7
   2.2.3 Usage of Channelization for DS3, DS2, DS1 ................  7
   2.2.4 Usage of Loopbacks .......................................  8
   2.3 Objectives of this MIB Module ..............................  9
   2.4 DS3/E3 Terminology .........................................  9
   2.4.1 Error Events ............................................. 10
   2.4.2 Performance Parameters ................................... 10



Fowler, Ed.                 Standards Track