RFC 2516 (rfc2516) - Page 1 of 17
A Method for Transmitting PPP Over Ethernet (PPPoE)
Alternative Format: Original Text Document
Network Working Group L. Mamakos
Request for Comments: 2516 K. Lidl
Category: Informational J. Evarts
UUNET Technologies, Inc.
D. Carrel
D. Simone
RedBack Networks, Inc.
R. Wheeler
RouterWare, Inc.
February 1999
A Method for Transmitting PPP Over Ethernet (PPPoE)
Status of this Memo
This memo provides information for the Internet community. It does
not specify an Internet standard of any kind. Distribution of this
memo is unlimited.
Copyright Notice
Copyright (C) The Internet Society (1999). All Rights Reserved.
Abstract
The Point-to-Point Protocol (PPP) [1] provides a standard method for
transporting multi-protocol datagrams over point-to-point links.
This document describes how to build PPP sessions and encapsulate PPP
packets over Ethernet.
Applicability
This specification is intended to provide the facilities which are
defined for PPP, such as the Link Control Protocol, Network-layer
Control Protocols, authentication, and more. These capabilities
require a point-to-point relationship between the peers, and are not
designed for the multi-point relationships which are available in
Ethernet and other multi-access environments.
This specification can be used by multiple hosts on a shared,
Ethernet to open PPP sessions to multiple destinations via one or
more bridging modems. It is intended to be used with broadband
remote access technologies that provide a bridged Ethernet topology,
when access providers wish to maintain the session abstraction
associated with PPP.
Mamakos, et. al. Informational